Mold in walls usually grows on the back of drywall, on framing or in insulation after a slow leak, condensation or water coming through masonry. National guides list wall mold removal at about $1,000 to $12,000 per job. Call the number on this page to be connected with a local mold company in Philadelphia.

Why walls grow mold
Philadelphia homes give mold several ways in. Old galvanized and cast-iron plumbing can leak inside a wall for months. Brick and stone party walls between rowhouses and twins can wick water from a neighbor's leak or a failed flat roof. In cold snaps, warm indoor air condenses on cold exterior walls. EPA's guide says mold needs moisture, and that fixing the water problem is the key to controlling it.
Signs it is behind the wall
Look for peeling or bubbling paint, discolored drywall, a musty smell, warped baseboards or damp plaster. The Pennsylvania Department of Health says mold could be present in a home with water leaks or damp areas. EPA says that in most cases, if visible mold growth is present, sampling is unnecessary, but a hidden problem may call for an inspection that includes opening a small section.
What happens on the job
A company finds and stops the water source, uses moisture meters to map the wet area, then cuts out and bags porous materials such as drywall and insulation, cleans or sands framing, and dries the cavity. Plaster-and-lath walls in older homes take more care than modern drywall. Rebuilding comes afterward. L&I says gypsum wallboard installed over existing wall surfaces needs no permit in one- or two-family dwellings, while larger repairs may.
What it costs
One national guide lists wall mold removal at about $1,000 to $12,000 per job, and drywall replacement at about $1.50 to $3.50 per square foot. These are national estimates, not Philadelphia quotes, and the wet area's size decides the range.
Pennsylvania checks
The Pennsylvania Department of Health says there are no federal or Pennsylvania state regulations about mold, so no state mold license exists to verify. Check the company's registration as a home improvement contractor with the Attorney General, with the "PA" number on the contract and a three-day right to cancel notice. Philadelphia's contractor license rules also apply to some repair work. If you rent, tell your landlord first and report to L&I through 311 if nothing is done. If you are across the river in New Jersey or in Delaware, the rules differ.
Mold Remediation Philadelphia is a free referral service, not a mold company.

Mold in Walls questions from Philadelphia homeowners
Can I paint over mold on a wall?
How much does wall mold removal cost?
Do I need a permit to replace drywall in Philadelphia?
What can I do if my landlord ignores wall mold?
Related mold services in Philadelphia
Helpful guides
Mold in Walls in nearby cities and towns
Bucks County
Montgomery County
Delaware County
Chester County
Camden County
Burlington County
Gloucester County
Mercer County
Hunterdon County
New Castle County
Sources
Last updated: