Mold remediation referrals for Philadelphia & nearby townsCall: (215) 774-2847
(215) 774-2847

Mold in Walls in Crum Lynne, PA

moldremediationphiladelphia.net

Wall mold in Crum Lynne usually starts as a leak you cannot see, and the sooner a local company checks it the less material has to come out.

Stained wall in your Crum Lynne home?
Call now to be connected with a local mold remediation company in Crum Lynne.
(215) 774-2847

When mold may be growing inside a wall, cut off the water feeding it and keep the room ventilated. Wet plaster, drywall and insulation usually get removed and the studs dried before any rebuild starts. Call the number on this page to be connected with a local mold company in Crum Lynne.

Inspection hole cut into drywall revealing mold inside the wall, mold in walls in Crum Lynne, PA

Reading the Clues

ObservationPossible meaning
Blistered paintWater pushing outward from behind
Swollen trim at the floorMoisture climbing from below
Odor with no stainA damp, closed cavity

Meter readings tell which one fits your wall, and a small opening confirms it before anyone starts removing material.

Plaster and lath in older houses

Older homes in this part of Delaware County often have plaster over wood lath instead of drywall. Plaster tolerates moisture for a while, then blisters, crumbles or traps dampness against the lath. Mold can grow on the back of the lath and in the cavity without much outward sign.

Call now to be connected with a local mold remediation company in Crum Lynne.
(215) 774-2847
Opened wall showing mold on the back of drywall and on studs, mold in walls in Crum Lynne, PA

Stopping the Source Costs Extra

Taking out moldy material does nothing about the failed pipe, window seal or flashing behind it. A plumber, installer or roofer typically handles those, and insurers often ask for proof of the repair. Fixing the source first spares you from paying twice for one wall.

Tools of the Trade

InstrumentPurpose
Moisture meterDampness in plaster, drywall and wood
Thermal cameraTemperature patterns hinting at wetness
BorescopeA view inside the cavity

None of these replaces looking inside. If readings stay high after the scan, only a small opening settles the question for certain.

Keeping humidity in check

EPA recommends keeping indoor humidity below about 60 percent, and ideally between 30 and 50. In muggy summers that means running a basement dehumidifier and bathroom exhaust fans. In winter, a little airflow along outside walls keeps condensation from lingering. Drier air makes a cavity less welcoming.

Local details for Crum Lynne

A company quoting rebuild work after mold removal on a Pennsylvania home should list its PA home improvement registration number on the paperwork. The Attorney General's office runs the lookup and takes complaints.

Some owners hire one independent company for the inspection and clearance check and a different company for the cleanup, so the business judging the result isn't the one that did the work.

Rebuild work after the mold comes out, such as new drywall or framing, may need a permit; the Ridley Township building office is where to ask for Crum Lynne addresses.

If river, creek or storm water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.

Calls from Crum Lynne are often matched with companies that also cover Chester, Ridley Park and Woodlyn.

Mold in Walls questions in Crum Lynne

What is an inspection opening?
A small hole cut in the wall so the company can look at the back of the finish and the cavity. It shows whether growth is there before anyone decides how much to remove. Afterward the hole is patched, or widened if the readings justify it.
How long before a wet wall grows mold?
Within a day or two is the target EPA gives for drying a soaked wall. Past that point growth becomes likelier, particularly in a warm, muggy house.
Does bleach work on wall mold?
Routine cleanup rarely calls for bleach or similar biocides, EPA says, and they would not reach growth on the back of the board anyway.
Is a wall in a rowhouse harder to fix?
It can be, since the shared masonry may carry moisture from next door and access is tight. The company will check both sides of the problem and tell you what part falls on your property.

More mold services in Crum Lynne

Mold in Walls nearby

Call now to be connected with a local mold remediation company in Crum Lynne.
(215) 774-2847

Last updated:

☎ Call (215) 774-2847